Vaporesso Luxe Q/QS Replacement Pods

Vaporesso Luxe Q/QS Replacement Pods are refillable replacement cartridges designed for compatible Vaporesso Luxe Q series pod kits. Each pod has a 2ml capacity, an integrated mesh coil and a top filling system, allowing you to refill the cartridge without changing a separate coil.

Available in four resistance options, these pods let you choose between tighter MTL vaping and a more open RDTL draw. The pod uses Vaporesso’s COREX mesh technology and can be used with suitable nicotine salt and 50/50 e liquids.

4 Pods Per Pack

Each pack contains four Vaporesso Luxe Q replacement pods.

The resistance is selected when ordering, so each four pack contains the same resistance option rather than a mixed selection.

Available options are:

• 0.6Ω
• 0.8Ω
• 1.0Ω
• 1.2Ω

2ml Refillable Capacity

Each pod holds 2ml of e liquid, meeting the UK TPD capacity requirement.

The pod is refillable, so you can use your preferred compatible e liquid rather than replacing the cartridge every time the liquid runs out.

Once the integrated coil reaches the end of its usable life, the entire pod is replaced.

Integrated Mesh Coil

The Luxe Q replacement pod has a built in mesh coil, removing the need to purchase or install separate coils.

This fixed coil design keeps pod maintenance straightforward. When flavour or vapour production starts to decline, replace the complete cartridge with a fresh Luxe Q pod.

0.6Ω Mesh Pod

The 0.6Ω option provides a more open draw and is positioned towards restricted direct to lung vaping.

It works well with suitable 50/50 e liquids and lower nicotine strengths when used at an appropriate power level.

This option is particularly relevant to users who prefer a more open inhale compared with higher resistance Luxe Q pods.

0.8Ω Mesh Pod

The 0.8Ω option sits between the more open 0.6Ω pod and the tighter higher resistance options.

It is well suited to MTL and works particularly well with nicotine salt and 50/50 e liquids.

For users looking for a versatile everyday resistance, the 0.8Ω option provides a balanced draw without being as tight as the higher resistance cartridges.

1.0Ω Mesh Pod

The 1.0Ω pod provides a tighter MTL experience.

Its higher resistance makes it suitable for users who prefer a cigarette style draw and lower powered vaping. It is also commonly paired with nicotine salt e liquids.

1.2Ω Pod

The 1.2Ω option provides the tightest draw within the standard Luxe Q resistance range.

It is designed around a restricted MTL experience and is particularly suited to lower powered vaping and compatible nicotine salt e liquids.

Top Fill Design

The Luxe Q pods use a top filling system.

To refill, remove the mouthpiece to access the filling ports, add your e liquid and replace the mouthpiece securely.

The top fill design helps make regular refilling straightforward while reducing the need to remove the pod from the device each time.

SSS Leak Resistant Technology

The Luxe Q pod platform uses Vaporesso’s SSS Leak Resistant Technology, designed to help contain e liquid within the pod and reduce leakage.

This technology is combined with the pod’s compact construction to provide a cleaner refillable pod setup.

Adjustable Airflow Through Pod Orientation

The Luxe Q pod allows airflow characteristics to be adjusted by changing the pod’s orientation.

Vape Superstore notes that rotating the pod 180 degrees changes the air intake, allowing users to alter the draw without using a separate airflow slider.

This gives the Luxe Q platform additional flexibility while keeping the device itself simple.

MTL And RDTL Vaping

The available resistance options cover different vaping styles.

0.6Ω: More open RDTL

0.8Ω: Balanced MTL and RDTL

1.0Ω: Tighter MTL

1.2Ω: Tightest MTL

The exact experience also depends on the Luxe device being used, e liquid and power output.

Compatible E Liquids

Luxe Q replacement pods are suitable for compatible e liquids, with retailers specifically recommending nicotine salts and balanced 50/50 formulations.

Suitable choices include:

• Nicotine salt e liquids
• 50/50 e liquids
• Higher PG e liquids
• Suitable low VG formulations

The 0.6Ω pod is better suited to a more open restricted draw, while the 1.0Ω and 1.2Ω options are more appropriate for tighter MTL vaping.

Vaporesso Luxe Q/QS Compatibility

These pods are part of the Vaporesso Luxe Q pod platform.

They are listed for use with:

• Vaporesso Luxe Q
• Vaporesso Luxe QS
• Vaporesso Luxe Q2
• Vaporesso Luxe Q2 SE

However, resistance compatibility differs between individual devices. For example, current compatibility information identifies the original Luxe Q with 0.8Ω and 1.2Ω options, while the Q2 and Q2 SE support additional resistance variants.

Important: These are not XROS pods and are not compatible with Vaporesso XROS series devices.

How To Fill Vaporesso Luxe Q Pods

1. Remove the pod from the device if required.
2. Remove the mouthpiece to access the filling port.
3. Add compatible e liquid into the fill opening.
4. Avoid overfilling the 2ml cartridge.
5. Replace the mouthpiece securely.
6. Allow a newly filled pod to sit before vaping.
7. Insert the pod into the compatible Luxe device.
8. Begin vaping at an appropriate power level.

When using a new pod for the first time, allowing the e liquid to saturate the internal wicking material helps reduce the chance of dry hits. Vapestore recommends allowing a newly filled pod to sit for around ten minutes before use.

When To Replace The Pod

The integrated coil is not designed to be removed separately.

Replace the complete Luxe Q pod when you notice:

• Reduced flavour
• Reduced vapour production
• Burnt taste
• Persistent dry hits
• Increased leakage
• Noticeable decline in performance

Using a fresh pod restores the integrated coil and wicking material.

Choosing The Right Luxe Q Pod

The correct resistance depends on your device and preferred vaping style.

For A More Open Draw

Choose 0.6Ω if your compatible Luxe device supports it and you prefer a more open RDTL experience.

For Balanced Vaping

Choose 0.8Ω for a versatile MTL or slightly more open draw.

For Tighter MTL

Choose 1.0Ω for a tighter MTL experience.

For The Tightest Draw

Choose 1.2Ω for the most restricted option within the standard resistance range.

Always check your specific Luxe device’s supported resistance before ordering.

What Comes In The Pack?

Each product contains:

• 4 × Vaporesso Luxe Q/QS Replacement Pods
• Integrated coils at the selected resistance

The pods are supplied without e liquid or a vape device.

Product Features

• Genuine Vaporesso replacement pods
• 4 pods per pack
• 2ml capacity per pod
• Integrated mesh coil
• 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω options
• Top filling
• COREX mesh technology
• SSS Leak Resistant Technology
• Adjustable airflow through pod orientation
• Refillable design
• MTL and RDTL options
• Suitable for compatible nicotine salts
• Suitable for 50/50 e liquids
• Designed for Luxe Q series devices

Key Specifications

Vaporesso Luxe Q/QS Replacement Pods FAQ

How many pods are in a pack?

Each pack contains four replacement pods with the resistance selected at the time of purchase.

What resistance options are available?

The range includes 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω options.

How much e liquid does each pod hold?

Each UK TPD pod has a 2ml capacity.

Are Luxe Q pods refillable?

Yes. These are refillable pods with a top filling system and integrated coils.

Do Luxe Q pods have replaceable coils?

No. The coil is built into the pod. When the coil reaches the end of its life, replace the complete pod.

Which Luxe devices are compatible?

The Luxe Q pod platform is used across compatible Luxe Q series devices, including the Luxe Q and Luxe QS. Current retailer information also lists the Luxe Q2 and Q2 SE, but resistance compatibility differs by device.

Are Luxe Q pods compatible with XROS devices?

No. Luxe Q pods use a different pod platform and are not compatible with the Vaporesso XROS series.

Which resistance is best for MTL?

The 1.0Ω and 1.2Ω options provide the tighter MTL experience, while 0.8Ω offers a more open draw.

Which Luxe Q pod is better for RDTL?

The 0.6Ω and 0.8Ω options are the more open choices and are suited to RDTL vaping on compatible devices.