VOOPOO TPP Replacement Coils
The VOOPOO TPP Replacement Coils are mesh sub-ohm coils designed for compatible VOOPOO TPP pods and tanks. Developed for direct-to-lung (DTL) vaping, the TPP coil range offers multiple resistances and wattage options, allowing you to choose a setup that matches your preferred balance of flavour, vapour and warmth.
TPP coils use VOOPOO’s mesh coil technology to provide a larger heating area and faster heating response. This helps create consistent vapour production and flavour when used within the recommended power range. The TPP range includes DM1, DM2, DM3 and DM4 options, covering resistances from 0.15Ω to 0.3Ω.
Each pack contains 3 replacement coils, making it easy to keep spare coils available and replace a depleted coil without replacing the complete pod or tank.
Key Features
- Genuine VOOPOO TPP replacement coils
- Mesh coil construction
- Multiple resistance options
- 0.15Ω, 0.2Ω and 0.3Ω variants
- Designed for DTL vaping
- Suitable for sub-ohm vape setups
- Compatible with TPP pods and tanks
- Available in different recommended wattage ranges
- Fast and even coil heating
- Designed for flavour and vapour production
- 3 coils per pack
- Push-fit replacement design
VOOPOO TPP Mesh Coil Technology
The TPP platform was developed by VOOPOO as a high-performance coil system for sub-ohm vaping. Its mesh heating structure provides a broad heating surface, helping the coil heat e-liquid efficiently across the coil material.
VOOPOO states that its TPP technology increases the atomisation area and improves heating speed, helping deliver a more responsive vaping experience.
Because the TPP range includes several coil configurations, you can select a resistance based on your preferred wattage and vaping style rather than being restricted to one coil specification.
TPP Coil Resistance Options
TPP-DM1 0.15Ω
The TPP-DM1 0.15Ω mesh coil is designed for higher-powered DTL vaping. VOOPOO specifies a 60–80W power range for this coil, making it suitable for users looking for a more powerful sub-ohm setup.
TPP-DM2 0.2Ω
The TPP-DM2 0.2Ω mesh coil operates at 40–60W. It provides a lower-power alternative to the DM1 while retaining the sub-ohm, DTL characteristics of the TPP platform.
TPP-DM3 0.15Ω
The TPP-DM3 0.15Ω mesh coil is designed for a higher power range of 80–100W. It is the higher-wattage 0.15Ω option within the TPP range and is intended for compatible high-output devices.
TPP-DM4 0.3Ω
The TPP-DM4 0.3Ω mesh coil is designed for a lower power range of 32–40W. VOOPOO classifies this version as a Half-DL option, making it a useful choice for users who prefer a less powerful experience than the lower-resistance TPP coils.
TPP Coil Wattage Guide
| Coil | Resistance | Recommended Power | Vaping Style |
|---|---|---|---|
| TPP-DM1 | 0.15Ω | 60–80W | DTL |
| TPP-DM2 | 0.2Ω | 40–60W | DTL |
| TPP-DM3 | 0.15Ω | 80–100W | DTL |
| TPP-DM4 | 0.3Ω | 32–40W | Half-DL |
Always stay within the manufacturer’s recommended wattage range for the specific coil installed in your device.
Compatible VOOPOO TPP Pods & Tanks
TPP coils are designed specifically for VOOPOO TPP pods and tanks. VOOPOO confirms that TPP pods use TPP coils, while PnP pods are designed for PnP coils, so the two platforms should not be treated as interchangeable.
TPP coils are used across compatible VOOPOO hardware, including devices and tanks from the DRAG and ARGUS ranges. For example, VOOPOO confirms TPP coil compatibility with the DRAG X Pro, DRAG S Pro and ARGUS GT II platforms.
Always check the specific pod or tank compatibility before purchasing, as not every VOOPOO device accepts every coil platform.
Designed for DTL Vaping
The TPP range is primarily aimed at sub-ohm DTL vaping, where vapour is inhaled directly into the lungs. The lower resistances and higher recommended wattages make these coils better suited to compatible high-output pod mods and tanks than traditional low-wattage MTL pod systems.
Your chosen resistance will affect the power required and the overall character of the vape. Lower-resistance options such as the 0.15Ω coils require higher wattage, while the 0.3Ω DM4 operates at a lower power range.
High-VG E-Liquid Compatibility
TPP coils are designed for sub-ohm vaping and are generally paired with higher-VG e-liquids. UK listings recommend 70% VG e-liquid or higher for the TPP range, while VOOPOO advises using an appropriate PG/VG ratio for coils below 0.6Ω.
For best results, choose an e-liquid that is appropriate for the resistance and wattage of your selected TPP coil.
How To Replace a VOOPOO TPP Coil
Replacing a TPP coil is straightforward:
- Remove the pod or tank from your compatible VOOPOO device.
- Empty or minimise the e-liquid level if necessary.
- Remove the old coil from the pod or tank.
- Prime the new TPP coil with a small amount of e-liquid.
- Push the replacement coil securely into position.
- Refill the pod or tank with e-liquid.
- Allow the new coil to saturate for at least 5 minutes before vaping.
- Start at the lower end of the recommended wattage range and gradually adjust if required.
VOOPOO recommends allowing a newly installed coil to soak before use and operating it within its specified wattage range.
When Should You Replace a TPP Coil?
A TPP coil is a consumable component and will eventually need replacing. The exact lifespan depends on factors such as e-liquid type, wattage, vaping frequency and how frequently the device is used.
Typical signs that a coil needs replacing include:
- Reduced flavour
- Reduced vapour production
- A burnt or unpleasant taste
- Noticeably weaker performance
- Darkened or heavily used coil material
Using a coil within its recommended wattage range and ensuring it remains adequately saturated can help maintain consistent performance. VOOPOO also recommends replacing coils after extended use.
Why Choose VOOPOO TPP Replacement Coils?
The TPP range gives compatible VOOPOO users several resistance options without changing to a different pod platform. From the 0.15Ω DM1 and DM3 through to the 0.2Ω DM2 and 0.3Ω DM4, each coil is designed around a different power range.
With mesh heating, multiple resistance choices and broad compatibility across compatible TPP hardware, these replacement coils offer a practical way to maintain your VOOPOO pod or tank while choosing the power level that suits your vaping preferences.
Product Specifications
| Specification | Details |
|---|---|
| Brand | VOOPOO |
| Product Type | Replacement Vape Coils |
| Coil Platform | TPP |
| Coil Type | Mesh |
| Resistances | 0.15Ω, 0.2Ω, 0.3Ω |
| Available Versions | DM1, DM2, DM3, DM4 |
| Vaping Style | DTL / Half-DL depending on coil |
| Recommended E-Liquid | High-VG / suitable sub-ohm e-liquid |
| Pack Size | 3 Coils |
| Installation | Push-Fit |
| Compatible Platform | VOOPOO TPP Pods & Tanks |
What’s Included?
- 3 x VOOPOO TPP Replacement Coils
Please select your preferred TPP resistance when ordering.
Important Information
- These are replacement coils only; a compatible VOOPOO device, pod or tank is required.
- TPP coils are designed for compatible TPP pods and tanks.
- TPP and PnP coils are different platforms and should not be used interchangeably.
- Check the recommended wattage for your selected resistance before vaping.
- Prime every new coil and allow sufficient time for the e-liquid to saturate the wicking material.
- Do not operate the coil outside its recommended power range.
- Coil lifespan varies depending on e-liquid, wattage and usage.
- E-liquid and vaping device are not included.
FAQs
What are VOOPOO TPP Replacement Coils?
VOOPOO TPP Replacement Coils are mesh sub-ohm coils designed for compatible VOOPOO TPP pods and tanks. They are available in several resistance and wattage configurations for DTL vaping.
What TPP coil resistances are available?
The TPP range includes 0.15Ω, 0.2Ω and 0.3Ω options across the DM1, DM2, DM3 and DM4 variants.
What is the wattage range for TPP coils?
The recommended ranges vary by model: DM1 is 60–80W, DM2 is 40–60W, DM3 is 80–100W and DM4 is 32–40W.
Are TPP coils mesh coils?
Yes. The TPP replacement range uses mesh coil construction.
Are TPP coils suitable for DTL vaping?
Yes. TPP coils are primarily designed for sub-ohm DTL vaping, with the DM4 listed by VOOPOO as a Half-DL option.
Can I use TPP coils in a PnP pod?
No. VOOPOO specifically states that PnP pods use PnP coils and TPP pods use TPP coils. Always use the coil platform specified for your pod or tank.
How many coils are included?
Each pack contains 3 VOOPOO TPP replacement coils.
How long should a TPP coil last?
There is no fixed lifespan because coil longevity depends on wattage, e-liquid, vaping frequency and other usage factors. Replace the coil when flavour or vapour production drops or a burnt taste develops.
How long should I wait before using a new TPP coil?
VOOPOO recommends allowing a newly installed and filled coil to sit for at least 5 minutes so the wicking material can become saturated before vaping.
Reviews
There are no reviews yet.