Vaporesso GTX Replacement Coils

Vaporesso GTX Replacement Coils are mesh replacement coils designed for compatible Vaporesso vape kits, pods and tanks. The GTX platform offers a range of resistance options, making it suitable for different vaping styles including MTL, RDTL and DTL.

Available options include 0.15Ω, 0.2Ω, 0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω, with lower-resistance coils generally suited to more direct vaping and higher-resistance options designed for a more restricted inhale. Vaporesso’s current GTX platform also includes selected dual-mesh versions of the 0.15Ω, 0.2Ω and 0.3Ω coils.

Each coil uses a mesh heating structure designed to heat e-liquid evenly across the coil surface, helping provide consistent flavour and vapour production. The push-fit design also makes changing a used coil straightforward on compatible devices.

GTX Coil Resistance Options

The GTX range provides different resistances to suit different vaping preferences and power levels. Lower-resistance coils are generally used at higher wattages, while higher-resistance coils operate at lower wattages and are more suited to MTL vaping.

• 0.15Ω Mesh – 60–75W, best around 70W
• 0.2Ω Mesh – 45–60W, best around 55W
• 0.3Ω Mesh – 32–45W, best around 40W
• 0.4Ω Mesh – 26–32W, best around 30W
• 0.6Ω Mesh – around 20–26W
• 0.8Ω Mesh – 12–16W
• 1.2Ω Mesh – around 7–11W

Always use the recommended wattage shown on the coil and make sure your vape device supports the selected resistance before use.

Mesh Coil Technology

The Vaporesso GTX coils use mesh heating technology to provide an even heating surface. Vaporesso also describes the GTX platform as using flax cotton and non-woven fabric in its coil construction to support e-liquid absorption and flavour performance.

• Mesh coil construction
• Even e-liquid heating
• Consistent vapour production
• Designed for flavour-focused vaping
• Available in multiple resistance options

MTL, RDTL and DTL Vaping

The GTX coil range covers several vaping styles, allowing you to select a resistance according to your preferred inhale and compatible device.

The 0.8Ω and 1.2Ω options are designed around lower-power, more restricted vaping, while the 0.6Ω option sits between MTL and more open vaping styles. The lower-resistance 0.15Ω to 0.4Ω options are intended for higher-power vaping and are generally used for DTL or more open draws.

• 0.8Ω and 1.2Ω – MTL
• 0.6Ω – lower-power RDTL-style vaping
• 0.4Ω – RDTL/DTL
• 0.15Ω, 0.2Ω and 0.3Ω – DTL
• Check your device and coil wattage before vaping

Push-Fit Coil Design

GTX coils use a push-fit design on compatible Vaporesso pods and tanks, making coil replacement simple. The used coil can be removed and a new GTX coil pushed securely into place.

This design avoids the need to screw individual coils into position and makes routine coil changes quicker.

Compatible Vaporesso Devices

Vaporesso GTX coils are cross-compatible with a selection of Vaporesso kits, pods and tanks. Current UK listings include devices from the Luxe, Armour, Target, Gen, GTX One and Xiron ranges, although compatibility depends on the specific coil resistance and device.

Examples of compatible Vaporesso products include:

• Vaporesso Armour G
• Vaporesso Armour GS
• Vaporesso Luxe XR
• Vaporesso Luxe XR Max
• Vaporesso Luxe XR Max 2
• Vaporesso Luxe X
• Vaporesso Target range
• Vaporesso Gen range
• Vaporesso GTX One
• Vaporesso Xiron

Compatibility can vary between coil resistances and coil versions, so always check your device specifications before ordering.

Choose the Right GTX Coil

Selecting the correct resistance is important for getting the expected performance from your Vaporesso device. The coil resistance must be supported by the pod or tank, and the device should be capable of operating within the coil’s recommended wattage range.

• 0.15Ω–0.3Ω – higher-power DTL vaping
• 0.4Ω – RDTL/DTL vaping
• 0.6Ω – RDTL-style vaping
• 0.8Ω–1.2Ω – MTL vaping
• Check resistance compatibility before purchase
• Follow the wattage range printed on the coil

E-Liquid Compatibility

The suitable e-liquid depends on the selected coil resistance, device and preferred vaping style. Vaporesso’s current GTX information lists lower-resistance coils with higher-VG e-liquids and higher-resistance options with more balanced PG/VG ratios and nicotine salt or freebase formulations.

For the best results, use an e-liquid that matches both the coil resistance and the recommendations for your specific Vaporesso device.

How to Replace a Vaporesso GTX Coil

Replacing a GTX coil is straightforward on compatible pods and tanks. Allowing the new coil to absorb e-liquid before vaping is important to help prevent a dry hit.

1. Remove the pod or tank from the vape device.
2. Remove the base if required by your specific pod or tank.
3. Pull the used GTX coil out of the pod or tank.
4. Add a few drops of e-liquid to the exposed cotton on the new coil.
5. Push the new GTX coil firmly into position.
6. Reassemble the pod or tank and fill it with your chosen e-liquid.
7. Allow the coil to saturate for around 5 minutes before vaping.
8. Start within the recommended wattage range shown for the selected coil.

When to Replace Your GTX Coil

A GTX coil will eventually need replacing as the internal cotton and heating element become saturated and performance decreases.

Common signs that a replacement may be required include:

• Reduced vapour production
• Weaker or altered flavour
• Burnt or unpleasant taste
• E-liquid consumption changing noticeably
• Coil reaching the end of its usable life

Coil lifespan varies depending on the e-liquid used, wattage, vaping frequency and individual usage.

Pack Contents

Each pack contains 5 Vaporesso GTX replacement coils.

• 5 x Vaporesso GTX Replacement Coils
• Selected resistance according to the option purchased

Product Specifications

Feature	Details
Product	Vaporesso GTX Replacement Coils
Brand	Vaporesso
Coil Type	Mesh
Pack Size	5 coils
Available Resistances	0.15Ω, 0.2Ω, 0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω
Vaping Styles	MTL, RDTL and DTL
Coil Design	Push-fit
0.15Ω Wattage	60–75W
0.2Ω Wattage	45–60W
0.3Ω Wattage	32–45W
0.4Ω Wattage	26–32W
0.6Ω Wattage	Around 20–26W
0.8Ω Wattage	12–16W
1.2Ω Wattage	Around 7–11W
Compatibility	Selected Vaporesso GTX-compatible devices

FAQs

What are Vaporesso GTX Replacement Coils?

Vaporesso GTX Replacement Coils are replacement mesh coils designed for compatible Vaporesso pods, tanks and vape kits.

What resistances are available?

The GTX platform includes 0.15Ω, 0.2Ω, 0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω options. Selected resistances are also available in dual-mesh versions.

Which GTX coil is suitable for MTL vaping?

The 0.8Ω and 1.2Ω GTX coils are the higher-resistance options suited to MTL vaping. Always confirm compatibility with your specific device.

Which GTX coils are designed for DTL vaping?

The lower-resistance 0.15Ω, 0.2Ω and 0.3Ω coils are designed for higher-power DTL vaping, while the 0.4Ω option can be used for more restricted or direct vaping depending on the device.

How many coils are in a pack?

Each pack contains 5 Vaporesso GTX replacement coils.

Are GTX coils mesh coils?

Yes. The GTX platform includes mesh coils across its resistance range, along with selected dual-mesh variants.

How often should I replace my GTX coil?

Coil lifespan depends on wattage, e-liquid, vaping frequency and individual usage. Replace the coil when flavour or vapour production drops or when you notice a persistent burnt taste.

Do all GTX coils fit every Vaporesso device?

No. Compatibility varies by device, pod, tank and coil resistance. Always check that your selected GTX coil is supported by your specific Vaporesso device before ordering.

Important Information

• 5 Vaporesso GTX replacement coils per pack
• Available in multiple resistance options
• Mesh coil construction
• Suitable for MTL, RDTL and DTL vaping
• Push-fit replacement design
• Recommended wattage varies by resistance
• Check device compatibility before purchase
• Prime the new coil before vaping
• Follow the wattage range printed on the selected coil
• Replace the coil when flavour or vapour performance declines