Innokin Klypse Refillable Pods

Innokin Klypse Refillable Pods are replacement 2ml pods designed for the Innokin Klypse range of pod vape kits. Featuring built-in mesh coils and a choice of 0.6Ω, 0.8Ω and 1.2Ω resistances, these pods let you choose between a more open RDTL draw and tighter MTL vaping.

Each pod uses a convenient side-filling system, allowing you to refill with your preferred e-liquid without changing coils separately. Once the built-in coil reaches the end of its lifespan, simply replace the complete pod with a fresh one.

Available in a 3-pack, Innokin Klypse replacement pods are a practical choice for keeping your compatible Klypse device ready to use.

Key Features

• Replacement pods for Innokin Klypse vape kits
• 2ml e-liquid capacity
• Built-in mesh coil design
• Available in 0.6Ω, 0.8Ω and 1.2Ω
• 0.6Ω option suited to RDTL vaping
• 0.8Ω option suited to MTL vaping
• 1.2Ω option for a tighter MTL draw
• Convenient side-filling system
• Refillable pod design
• Supplied in a pack of 3
• Designed for use with suitable 50/50 and higher-PG e-liquids

Choose Your Klypse Pod Resistance

The Innokin Klypse refillable pod range gives you three resistance options, allowing you to select a draw that matches your preferred vaping style. Innokin confirms that the Klypse platform supports 0.6Ω, 0.8Ω and 1.2Ω refillable pods.

0.6Ω Klypse Pod – RDTL

The 0.6Ω Klypse pod is the most open option in the range. It is designed for a more airy Restricted Direct To Lung (RDTL) inhale, making it suitable for vapers who prefer a warmer and more open draw.

This option is particularly suited to compatible Klypse devices that can provide the required power for the 0.6Ω pod.

0.8Ω Klypse Pod – MTL

The 0.8Ω Klypse pod provides a balanced Mouth To Lung (MTL) experience. It offers a warmer draw than the higher-resistance option while maintaining a relatively restricted inhale.

It is a versatile choice for everyday vaping and is also supplied with some Klypse kits, including the Klypse Plus. Current Innokin information confirms that the Klypse Plus is compatible with the complete Klypse pod range.

1.2Ω Klypse Pod – Tight MTL

The 1.2Ω Klypse pod delivers the tightest draw of the three options. Its more restricted airflow is suited to traditional MTL vaping and works well with e-liquids intended for higher-resistance pod systems.

If you prefer a tighter inhale and lower-power vaping style, the 1.2Ω version provides an alternative to the more open 0.6Ω and 0.8Ω pods.

2ml Refillable Pod Design

Each Innokin Klypse replacement pod features a 2ml e-liquid capacity, making it suitable for the UK TPD-compliant market.

The pods are designed to be refilled rather than discarded after a single use. A side-fill port provides straightforward access for adding e-liquid. Once filled, allow a new pod to saturate before vaping.

Innokin’s Klypse instructions recommend waiting at least five minutes after filling a new pod before vaping, allowing the e-liquid to properly saturate the coil.

Built-In Mesh Coil

Innokin Klypse refillable pods use built-in mesh coil technology, meaning the coil is integrated into the pod rather than being a separate replaceable component.

Mesh heating elements provide a broad heating surface and are designed to efficiently vaporise e-liquid. When the coil eventually reaches the end of its usable lifespan, the entire pod can be replaced.

This makes maintenance straightforward: there is no need to remove a separate coil or disassemble the pod.

Side-Filling System

Refilling the Klypse pod is simple thanks to its side-fill design.

To refill:

1. Remove the pod from the Klypse device if necessary.
2. Open the silicone fill tab on the pod.
3. Add e-liquid carefully through the fill port.
4. Close the silicone stopper securely.
5. Allow a new pod to stand for at least five minutes before vaping.
6. Reinsert the pod into your Klypse device.

Avoid vaping the pod when it is empty. Innokin recommends keeping the pod at least partially filled for better pod longevity and flavour performance.

Klypse Pod Compatibility

Innokin designed the Klypse platform around interchangeable pod compatibility. Innokin states that its Klypse devices work with the full range of Klypse refillable pods, including the 0.6Ω, 0.8Ω and 1.2Ω versions.

Compatible Klypse devices include:

• Innokin Klypse
• Innokin Klypse Zip
• Innokin Klypse Mecha
• Innokin Klypse Pro
• Innokin Klypse Plus

The Klypse Plus is specifically confirmed by Innokin as compatible with all Klypse pods from 0.6Ω to 1.2Ω.

Always check the resistance and recommended power range for your particular Klypse device before use.

What E-Liquid Should You Use?

The most suitable e-liquid depends on the pod resistance and your preferred vaping style.

For the Klypse range, balanced 50/50 VG/PG e-liquids are a suitable choice for the refillable pods. Higher-PG formulations can also be suitable, particularly with the higher-resistance MTL options.

The 0.6Ω pod is designed for a more open RDTL style, while the 0.8Ω and 1.2Ω versions provide progressively tighter MTL experiences.

For nicotine strength, choose an e-liquid according to your individual requirements and always follow the manufacturer’s guidance for your device and e-liquid.

When Should You Replace an Innokin Klypse Pod?

Klypse pods are consumable components, so their lifespan will vary depending on e-liquid, usage frequency and vaping habits.

You may need to replace your pod when you notice:

• A noticeable reduction in flavour
• Reduced vapour production
• A persistent burnt or unpleasant taste
• Changes in the normal draw or pod performance

Innokin advises replacing the pod if a burnt taste develops or when flavour and vapour production have significantly decreased.

Using a fresh pod restores the built-in coil and provides a simple way to maintain your Klypse device.

Specifications

Specification	Details
Product Type	Refillable Replacement Pods
Brand	Innokin
Pod Range	Klypse
Capacity	2ml
Coil Type	Built-In Mesh
Resistance Options	0.6Ω / 0.8Ω / 1.2Ω
0.6Ω Vaping Style	RDTL
0.8Ω Vaping Style	MTL
1.2Ω Vaping Style	MTL
Filling Method	Side Fill
Pack Size	3 Pods
E-Liquid Type	Suitable for 50/50 and higher-PG formulations
Compatibility	Innokin Klypse Series

What’s Included?

3 x Innokin Klypse Refillable Pods in your selected resistance

Please note: The Klypse vape device and e-liquid are not included.

Frequently Asked Questions

Are Innokin Klypse pods refillable?

Yes. Innokin Klypse pods are refillable 2ml pods with a side-fill system. They can be filled with your preferred compatible e-liquid.

How many Innokin Klypse pods are in a pack?

Each pack contains 3 replacement pods in the resistance selected when ordering.

What resistance options are available?

The Klypse refillable pod range is available in 0.6Ω, 0.8Ω and 1.2Ω options.

Which Klypse pod is best for MTL vaping?

Both the 0.8Ω and 1.2Ω pods are designed for MTL vaping. The 1.2Ω option provides a tighter draw, while the 0.8Ω offers a more balanced MTL experience.

Which Klypse pod is designed for RDTL?

The 0.6Ω Klypse pod is the most suitable option for a more open RDTL draw.

Do Klypse pods have replaceable coils?

No. The coil is built into the pod. When the coil reaches the end of its lifespan, the complete pod should be replaced.

How much e-liquid does a Klypse pod hold?

Each Klypse refillable pod has a 2ml e-liquid capacity.

How long does an Innokin Klypse pod last?

Pod lifespan varies depending on usage, e-liquid type and vaping habits. Replace the pod when flavour or vapour production drops significantly or when a persistent burnt taste develops.

Why Buy Innokin Klypse Replacement Pods?

Innokin Klypse replacement pods provide a straightforward way to keep compatible Klypse pod kits in regular use. With three resistance choices, a 2ml refillable design, integrated mesh coils and simple side filling, you can select the pod that best matches your preferred vaping style.

The 0.6Ω, 0.8Ω and 1.2Ω options cover different draw preferences, from a more open RDTL inhale to tighter MTL vaping. Supplied in packs of three, these replacement pods are a practical accessory for users of compatible Innokin Klypse devices.