SMOK Nord Pro Coils
The SMOK Nord Pro Coils are replacement mesh coils designed specifically for the SMOK Nord Pro Pod Kit and Nord Pro Pods. Available in 0.6Ω and 0.9Ω mesh options, these coils let you choose between a more open direct to lung draw or a tighter mouth to lung vaping style.
Each coil uses a mesh heating element designed to heat e liquid evenly across the coil surface, helping provide consistent flavour and vapour production. The coils use a convenient push fit installation, making it straightforward to remove a used coil and install a fresh one.
Each pack contains 5 replacement coils, making the SMOK Nord Pro Coils a practical choice for keeping a compatible Nord Pro pod ready for regular coil changes.
SMOK Nord Pro Coil Options
The Nord Pro range has two dedicated mesh coil options, each designed around a different vaping style.
0.6Ω Mesh DL Coil
The 0.6Ω Nord Pro Mesh coil is designed for direct to lung vaping. Its lower resistance produces more vapour than the 0.9Ω option and provides a more open style of draw.
The 0.6Ω version is rated around 20W and is suited to vapers looking for a more substantial vapour output from the Nord Pro system.
0.9Ω Mesh MTL Coil
The 0.9Ω Nord Pro Mesh coil is designed for mouth to lung vaping. Its higher resistance works at lower power and produces less vapour than the 0.6Ω version.
It provides a tighter draw that is suited to users who prefer a more restricted vaping experience. The 0.9Ω version is commonly paired with 50/50 and higher PG e liquids, including suitable nicotine salt formulations.
0.6Ω Vs 0.9Ω Nord Pro Coils
Choosing between the two SMOK Nord Pro coils largely depends on the draw and vapour production you prefer.
| Feature | 0.6Ω Mesh DL | 0.9Ω Mesh MTL |
|---|---|---|
| Resistance | 0.6Ω | 0.9Ω |
| Coil Type | Mesh | Mesh |
| Vaping Style | Direct To Lung | Mouth To Lung |
| Approx. Power | 20W | 15W |
| Vapour Production | Higher | Lower |
| Draw | More Open | More Restricted |
| E Liquid | Suitable liquid according to device and coil requirements | 50/50 or High PG suitable liquids |
| Best For | More vapour and an open draw | Tighter draw and lower vapour |
SMOK’s own compatibility documentation identifies these as the Nord PRO Meshed 0.6Ω DL Coil and Nord PRO Meshed 0.9Ω MTL Coil.
Mesh Coil Technology For Consistent Flavour
Both Nord Pro coil versions feature a mesh heating element. Mesh provides a broad heating surface that allows the e liquid to be heated across more of the coil area.
This design is intended to provide consistent heating while producing the flavour and vapour associated with the selected resistance. The 0.6Ω and 0.9Ω versions use the same general mesh construction but are designed for different power levels and draw styles.
Push Fit Design For Easy Coil Changes
SMOK Nord Pro Coils feature a push fit design, meaning they do not need to be screwed into the pod.
To replace a coil, remove the existing coil from the bottom of the compatible Nord Pro pod and push the new coil firmly into position. This makes routine coil replacement quicker and avoids dealing with threaded coil heads.
How To Replace SMOK Nord Pro Coils?
Replacing a Nord Pro coil is a straightforward process:
- Remove the pod from your SMOK Nord Pro device.
- Remove the existing coil from the bottom of the pod.
- Prepare the new Nord Pro replacement coil.
- Add a few drops of e liquid to the exposed cotton areas of the new coil.
- Fill the pod with your chosen e liquid.
- Push the new coil firmly into the pod.
- Allow the coil to saturate before vaping.
- Reattach the pod and use the device at the appropriate power level.
Priming the coil before use helps saturate the internal wicking material and reduces the chance of a dry hit when a fresh coil is first used.
How To Prime A Nord Pro Coil?
Proper priming is important when installing a new coil. Before inserting the coil into the pod, apply a small amount of e liquid to the visible wicking areas.
Once the coil has been installed and the pod filled, allow the e liquid time to soak into the internal cotton before vaping. Start at the lower end of the recommended power range and increase only within the coil’s suitable operating range.
Avoid using a new coil immediately after filling the pod, as the internal wick needs time to become fully saturated.
When Should You Replace A Nord Pro Coil?
The lifespan of a replacement coil depends on factors such as e liquid type, vaping frequency, power level and draw length. Rather than replacing a coil after a fixed number of days, look for changes in performance.
Signs that your SMOK Nord Pro coil may need replacing include:
- A noticeable reduction in flavour
- Reduced vapour production
- A burnt or unpleasant taste
- Gurgling or inconsistent performance
- E liquid no longer producing the expected flavour
If a fresh coil is producing a burnt taste, check that it has been properly primed and that you are operating it within its recommended power range.
Which E Liquid Works With SMOK Nord Pro Coils?
The appropriate e liquid depends on the coil resistance and your preferred vaping style.
The 0.6Ω mesh DL coil is designed for a more open draw and higher vapour production, while the 0.9Ω mesh MTL coil is intended for a tighter draw with lower vapour production. Retail listings commonly recommend 50/50 or higher PG liquids for the 0.9Ω version, while the 0.6Ω coil is suited to a more vapour focused setup.
Always check the e liquid and device manufacturer’s recommendations before use.
SMOK Nord Pro Coil Compatibility
SMOK’s official compatibility documentation lists both the Nord PRO Meshed 0.6Ω DL Coil and Nord PRO Meshed 0.9Ω MTL Coil within the Nord Pro coil range.
These coils are designed for use with:
- SMOK Nord Pro Pod Kit
- SMOK Nord Pro Pod
The Nord Pro coils should not be confused with standard SMOK Nord coils or coils from the RPM and LP2 ranges. Compatibility depends on the specific pod being used, so always check your device and pod before ordering.
Why Choose SMOK Nord Pro Replacement Coils?
The SMOK Nord Pro replacement coil range provides two resistance options in the same coil family. This allows users of the Nord Pro system to change their draw style without changing to a completely different pod platform.
The 0.6Ω mesh coil is suited to a more open DL experience, while the 0.9Ω mesh coil is intended for MTL vaping. Both use mesh heating and a push fit format for convenient replacement.
What Is Included?
Each pack contains:
- 5 x SMOK Nord Pro Replacement Coils
- Your selected resistance: 0.6Ω or 0.9Ω
- Mesh coil construction
- Push fit installation
The SMOK Nord Pro device, pod and e liquid are not included.
SMOK Nord Pro Coils FAQs
What resistance options are available for SMOK Nord Pro Coils?
SMOK Nord Pro Coils are available in 0.6Ω and 0.9Ω mesh versions. The 0.6Ω version is designed for DL vaping, while the 0.9Ω version is designed for MTL vaping.
How many SMOK Nord Pro Coils are in a pack?
Each pack contains 5 replacement coils. You can select the required resistance when purchasing, depending on your preferred vaping style.
Are SMOK Nord Pro Coils mesh coils?
Yes. Both the 0.6Ω and 0.9Ω Nord Pro coils use mesh heating elements. The mesh construction is designed to provide even heating and consistent flavour.
What is the difference between 0.6Ω and 0.9Ω Nord Pro Coils?
The 0.6Ω coil is designed for direct to lung vaping and produces more vapour, while the 0.9Ω coil is designed for mouth to lung vaping with a more restricted draw and lower vapour production.
What wattage should I use with SMOK Nord Pro Coils?
The 0.6Ω Nord Pro Mesh DL coil is commonly specified around 20W, while the 0.9Ω Mesh MTL coil is commonly specified around 15W. Always check the markings on your specific coil and the manufacturer’s recommendations before setting the power.
Are SMOK Nord Pro Coils compatible with the original SMOK Nord?
Nord Pro coils should not simply be treated as interchangeable with every standard Nord pod. SMOK identifies the Nord PRO 0.6Ω and 0.9Ω coils as Nord Pro variants, so compatibility should be checked against the specific pod being used.
How do I install a SMOK Nord Pro Coil?
The Nord Pro uses a push fit coil design. Remove the old coil from the bottom of the compatible pod and push the new coil into place. Prime the new coil with e liquid and allow it to saturate before vaping.
How long do SMOK Nord Pro Coils last?
There is no fixed lifespan for a Nord Pro coil. Usage depends on vaping frequency, e liquid composition, power level and draw length. Replace the coil when flavour or vapour production drops or when a persistent burnt taste develops.
Do SMOK Nord Pro Coils come with a pod?
No. These are replacement coils only. The compatible Nord Pro pod and device are sold separately.
Can I use nicotine salt with SMOK Nord Pro Coils?
The 0.9Ω MTL coil is the lower power option and is commonly recommended with suitable 50/50 and nicotine salt e liquids. The 0.6Ω DL coil is designed for a more open, higher vapour setup. Always select an e liquid strength and composition appropriate for your vaping style and the coil manufacturer’s guidance.
Reviews
There are no reviews yet.