SMOK RPM 2 Replacement Coils

Keep your compatible SMOK vape device performing consistently with SMOK RPM 2 Replacement Coils. Designed for the RPM 2 pod system, these replacement coils are available in different resistances to suit both Mouth To Lung (MTL) and Direct To Lung (DTL) vaping styles.

The RPM 2 coil range includes mesh and dual coil options, allowing you to choose a resistance based on your preferred draw, vapour production and e-liquid setup. Each pack contains 5 replacement coils, giving you a convenient supply for replacing used coils and maintaining flavour performance.

SMOK lists the RPM 2 family with 0.16Ω Mesh, 0.25Ω DC and 0.6Ω DC MTL coils, while retailer listings also offer a 0.3Ω Mesh option. Always select the correct resistance and check your pod compatibility before installation.

SMOK RPM 2 Coil Options

The RPM 2 range offers different coil constructions and resistances for different vaping preferences. Selecting the appropriate coil is important because resistance affects the recommended power range, vapour production and vaping style.

RPM 2 0.16Ω Mesh Coil

The 0.16Ω Mesh Coil is designed for a more open, higher power DTL vaping experience. Its mesh heating element provides a larger heating surface and is designed to produce richer flavour and denser vapour.

This coil is generally paired with higher VG e-liquids and higher wattage vaping. Vape UK lists the 0.16Ω RPM 2 Mesh coil at 20W to 50W, with 40W as the best setting, while other retailer guidance places it within a similar higher-power range.

RPM 2 0.25Ω DC Coil

The 0.25Ω DC Coil uses a dual coil construction and is intended for DTL vaping. It operates at a higher power range than the lower wattage MTL option.

Vape UK lists the 0.25Ω DC version for 30W to 50W DTL vaping.

RPM 2 0.3Ω Mesh Coil

The 0.3Ω Mesh Coil provides another option for users looking for a balance between flavour and vapour production. Its mesh construction is designed to heat e-liquid evenly across the coil surface.

The 0.3Ω version is listed by Vape UK as operating between 25W and 35W, with 30W as the best setting.

RPM 2 0.6Ω DC MTL Coil

The 0.6Ω DC MTL Coil is designed for a tighter Mouth To Lung vaping style. It operates at a lower wattage than the sub-ohm DTL options and is suitable for users who prefer a more restricted draw.

Vape UK lists the 0.6Ω DC coil at 12W to 25W, while Double Drip recommends this resistance with 50/50 and higher PG e-liquids.

Which SMOK RPM 2 Coil Should You Choose?

Your choice of RPM 2 coil depends mainly on your preferred vaping style and the type of e-liquid you use.

Coil	Construction	Suggested Style	Recommended Wattage*
0.16Ω	Mesh	DTL	20W to 50W
0.25Ω	DC	DTL	30W to 50W
0.3Ω	Mesh	DTL	25W to 35W
0.6Ω	DC	MTL	12W to 25W

*Recommended wattage can differ between listings and individual setups. Always check the markings on the specific coil and your device manufacturer’s guidance before use.

Mesh Coil Technology For Richer Flavour

Selected RPM 2 coils feature mesh heating elements rather than a conventional single wire. Mesh construction provides a broader heating surface, which helps distribute heat across the e-liquid saturated cotton.

The 0.16Ω and 0.3Ω versions use mesh construction, while the 0.25Ω and 0.6Ω options use DC coil designs.

MTL And DTL Vaping Options

One of the main advantages of the SMOK RPM 2 replacement coil range is the choice between different vaping styles.

MTL vaping produces a tighter draw that is closer to the sensation associated with smoking a traditional cigarette. The 0.6Ω DC MTL coil is designed for this style.

DTL vaping provides a more open draw with increased vapour production. The lower resistance RPM 2 options, including the 0.16Ω and 0.25Ω coils, are designed for higher power DTL use.

E Liquid Compatibility

The appropriate e-liquid depends on the resistance and vaping style of the coil you select.

The 0.16Ω mesh coil is suited to higher VG e-liquids, including 70% VG formulations, for DTL vaping. The 0.6Ω MTL coil is more suitable for 50/50 e-liquids, nicotine salts and higher PG formulations.

Using an e-liquid that is appropriate for the selected coil helps the wick remain properly saturated and supports consistent performance.

5 Coils Per Pack

Every pack contains 5 SMOK RPM 2 replacement coils. Having multiple coils in one pack means you have replacements ready when the installed coil reaches the end of its usable life.

Coil lifespan depends on factors such as vaping frequency, wattage, e-liquid composition and how well the coil is primed before use.

How To Replace SMOK RPM 2 Coils?

Replacing an RPM 2 coil is a straightforward process when used with a compatible refillable pod.

Remove The Used Coil

Remove the pod from your compatible SMOK device and empty any remaining e-liquid if required. Remove the used coil from the bottom of the pod.

Install The New Coil

Take a new RPM 2 coil from the pack and push it firmly into the compatible pod until it is seated correctly.

Fill The Pod

Fill the pod with your chosen compatible e-liquid and make sure the coil is properly saturated.

Allow The Coil To Prime

Allow the newly installed coil to sit for several minutes before vaping. SMOK’s RPM 2 instructions specifically advise allowing time for the cotton to become saturated after filling.

Start At The Appropriate Wattage

Begin within the manufacturer’s recommended wattage range for the selected coil. Avoid immediately applying excessive power to a new coil.

How To Prime SMOK RPM 2 Coils

Proper priming helps prevent dry or burnt hits when installing a fresh coil.

After fitting the new coil, fill the pod with e-liquid and allow the liquid to soak into the cotton. Double Drip recommends leaving a newly installed coil for around 5 to 10 minutes before vaping.

For best results, begin at the lower end of the recommended wattage range and increase gradually if required.

When Should You Replace An RPM 2 Coil?

A replacement coil is required once the existing coil reaches the end of its usable life. Common signs include:

• Reduced flavour
• Lower vapour production
• A noticeable burnt taste
• Unusual or unpleasant flavour
• Reduced e-liquid absorption
• Darkened or burnt looking cotton

Coil lifespan is not fixed because usage varies between vapers. Frequent vaping and heavily sweetened e-liquids can cause coils to require replacement sooner.

Compatible SMOK Devices

RPM 2 coils are used with compatible RPM 2 pod systems and other SMOK devices that specifically support RPM 2 coils.

SMOK’s compatibility guidance lists RPM 2 coils for compatible pod families including IPX 80, Nord 4, Thallo and Nord X RPM 2 pods. The exact compatibility depends on the pod installed in the device.

For example, SMOK’s Nord X uses an RPM 2 Mesh 0.16Ω coil in its RPM 2 pod, while the IPX 80 is also supplied with RPM 2 0.16Ω and 0.6Ω coils.

Important: RPM and RPM 2 coils are different coil families. Always check that your pod specifically accepts RPM 2 coils before purchasing.

What’s Included?

Each pack contains:

• 5 x SMOK RPM 2 Replacement Coils

The vape device, pod and e-liquid are not included unless specifically stated in the product listing.

Key Features Of SMOK RPM 2 Replacement Coils

• Genuine SMOK RPM 2 coil family
• 5 replacement coils per pack
• Multiple resistance options
• Mesh and DC coil designs
• Options for MTL and DTL vaping
• Suitable resistance options for different e-liquid types
• Push-fit replacement design
• Designed for compatible SMOK RPM 2 pods
• Available in 0.16Ω, 0.25Ω, 0.3Ω and 0.6Ω options depending on availability

SMOK RPM 2 Replacement Coils FAQs

How many coils are in a SMOK RPM 2 pack?

Each SMOK RPM 2 replacement coil pack contains 5 coils. SMOK’s own compatibility information lists the RPM 2 0.16Ω Mesh and 0.6Ω DC MTL coils in 5-piece packs.

What resistance options are available for RPM 2 coils?

The RPM 2 family includes 0.16Ω Mesh, 0.25Ω DC and 0.6Ω DC MTL coils according to SMOK’s compatibility information. Retailers also list a 0.3Ω Mesh option.

Are SMOK RPM and RPM 2 coils the same?

No. SMOK RPM and RPM 2 are separate coil families. A pod designed for standard RPM coils should not automatically be assumed to accept RPM 2 coils. Check your pod model before ordering.

Which RPM 2 coil is best for MTL vaping?

The 0.6Ω DC MTL coil is the RPM 2 option specifically designed for Mouth To Lung vaping. It operates at a lower power range of around 12W to 25W according to Vape UK’s product information.

Which RPM 2 coil is suitable for DTL vaping?

The lower resistance options, including the 0.16Ω Mesh and 0.25Ω DC coils, are designed for higher power DTL vaping. The 0.16Ω Mesh coil is listed at 20W to 50W, while the 0.25Ω DC coil is listed at 30W to 50W.

How long does an RPM 2 coil last?

There is no fixed lifespan for an RPM 2 coil. How long it lasts depends on vaping frequency, wattage, e-liquid composition and how the coil is maintained. A burnt taste, weaker flavour or reduced vapour production usually indicates that the coil needs replacing.

Do I need to prime a new RPM 2 coil?

Yes. A new coil should be saturated with e-liquid before vaping. After filling the pod, allow the coil time to absorb the e-liquid. SMOK’s RPM 2 instructions advise waiting after filling so the cotton becomes fully saturated.

Can I use nicotine salt e-liquid with RPM 2 coils?

Nicotine salt e-liquid is generally suited to the 0.6Ω MTL RPM 2 coil when used at the appropriate power level. Lower resistance DTL coils are better suited to e-liquids designed for higher power vaping. Vape UK specifically lists Nic Salt compatibility for suitable RPM 2 coil setups.

What is the difference between 0.16Ω Mesh and 0.6Ω DC RPM 2 coils?

The 0.16Ω Mesh is a lower resistance coil intended for higher wattage DTL vaping and greater vapour production. The 0.6Ω DC is designed for lower wattage MTL vaping with a tighter draw.

Are SMOK RPM 2 coils suitable for the SMOK RPM 2 Kit?

Yes. The RPM 2 Kit is specifically designed around the RPM 2 coil family. SMOK states that the RPM 2 and RPM 2S use RPM 2 compatible pods and mesh coils designed for their respective vaping styles.

Age Requirement: 18+ only. Nicotine products are intended for adult smokers and nicotine users. Always follow the manufacturer’s instructions and applicable UK regulations.