SKE Crystal CL6000 Prefilled Pod Kit

The SKE Crystal CL6000 Prefilled Pod Kit is a rechargeable, reusable pod vape designed for a convenient MTL vaping experience with up to 6,000 puffs per prefilled pod setup. Combining SKE’s popular Crystal flavour range with an 800mAh built-in battery, the CL6000 offers a practical alternative to single-use vape formats.

Each CL6000 uses a two-part prefilled system consisting of a 2ml pod and 10ml refill container, providing a combined 12ml of e-liquid. The pod contains an integrated dual-mesh coil and comes prefilled with 20mg nicotine salt e-liquid, so there is no need to manually refill the pod or change coils.

Key Features

• Up to 6,000 puffs
• 800mAh rechargeable built-in battery
• 2ml prefilled pod + 10ml refill container
• 20mg nicotine salt e-liquid
• Dual-mesh coil technology
• Inhale activation
• Fixed MTL draw
• Battery-level display
• USB Type-C charging
• Reusable prefilled pod system
• Wide selection of SKE Crystal flavours

Up to 6,000 Puffs

The SKE Crystal CL6000 is designed to provide up to 6,000 puffs from its 2ml pod and 10ml refill combination. Actual puff count will vary according to draw length, frequency and individual vaping habits.

The two-piece format means that once the prefilled pod system has been depleted, you can replace it with a compatible CL6000 refill rather than replacing the rechargeable device itself.

2ml Pod + 10ml Refill Container

The CL6000 uses a convenient 2ml prefilled pod with a connected 10ml e-liquid container. Together, these provide 12ml of prefilled e-liquid for extended use.

There is no need to measure or pour e-liquid into the pod. Once the refill system is depleted, simply replace it with a compatible SKE Crystal CL6000 prefilled pod and refill.

Current UK listings confirm the 2ml + 10ml configuration.

800mAh Rechargeable Battery

An integrated 800mAh battery powers the CL6000, providing rechargeable performance for extended everyday use. Unlike a single-use vape, the device can be recharged and used with replacement prefilled pods.

The battery is rechargeable via USB Type-C, making it straightforward to top up when required.

Battery Display

The CL6000 features an integrated display that provides information about the device’s remaining battery level. This allows you to check the charge status before your next vaping session instead of relying solely on the device’s performance to indicate when charging is needed.

Dual Mesh Coil Technology

The prefilled CL6000 pod incorporates a dual-mesh coil designed to provide consistent heating across the e-liquid. Mesh coil technology offers a broad heating surface, helping deliver even flavour and vapour production throughout the pod’s use.

Because the coil is built into the prefilled pod, there is no separate coil to install, prime or replace.

20mg Nicotine Salt E-Liquid

The CL6000 prefilled pod system contains 20mg nicotine salt e-liquid. Nicotine salt is commonly used in compact MTL pod systems and is formulated for a smooth nicotine vaping experience.

The CL6000 is intended for adult nicotine users only.

MTL Vaping

The SKE Crystal CL6000 uses a fixed mouth-to-lung (MTL) draw. MTL vaping involves drawing vapour into the mouth before inhaling, producing a more restricted style of inhale compared with direct-to-lung devices.

The inhale-activated design means there is no firing button to operate. Simply draw on the mouthpiece to activate the device.

SKE Crystal Flavour Range

The CL6000 is available with a broad selection of flavours from the SKE Crystal range. Current UK listings include options such as Blue Fusion, Blue Razz Fruit Gum, Blueberry Cherry Cranberry, Cola Ice, Fruit Medley, Kiwi Passionfruit Guava, Peach Mango Watermelon, Grape Splash and Strawberry Raspberry Cherry, among others.

This allows you to choose the CL6000 flavour that best matches your preferred fruit, ice, candy or drink-inspired profile.

Easy Prefilled Pod System

The CL6000 is designed to keep vaping straightforward. There is no manual e-liquid filling and no separate coil replacement. The pod arrives prefilled, while the matching 10ml container supplies the extended e-liquid capacity.

When the e-liquid has been used, remove the depleted pod and replace it with a compatible CL6000 prefilled pod and refill.

How To Use the SKE Crystal CL6000

1. Remove the CL6000 from its packaging.
2. Charge the device using a compatible USB Type-C cable if required.
3. Remove any protective seals from the prefilled pod.
4. Insert the pod into the CL6000 device.
5. Allow the pod system to settle before vaping.
6. Inhale through the mouthpiece to activate the device.
7. Monitor the battery display and recharge when required.
8. Replace the complete prefilled pod and refill once the e-liquid is depleted.

When Should You Replace the Pod?

The prefilled pod should be replaced once the e-liquid has been used or when flavour and vapour production noticeably decrease.

The CL6000 uses an integrated coil, so there is no separate coil head to replace. A fresh prefilled pod restores the e-liquid supply and heating element.

Specifications

Feature	Details
Brand	SKE
Product	Crystal CL6000 Prefilled Pod Kit
Puff Count	Up to 6,000
Battery	800mAh Built-In Rechargeable
Charging	USB Type-C
Pod Capacity	2ml
Refill Container	10ml
Total E-Liquid	12ml
Nicotine Strength	20mg
Nicotine Type	Nicotine Salt
Coil	Dual Mesh
Vaping Style	MTL
Activation	Inhale Activated
Airflow	Fixed
Display	Battery-Level Display
Pod Type	Prefilled
Device Type	Reusable Pod Kit

The core specifications above are supported by current UK CL6000 listings.

What’s Included?

• 1 x SKE Crystal CL6000 rechargeable device
• 1 x 2ml prefilled pod
• 1 x 10ml prefilled refill container

Note: The exact box contents can vary by retailer or package version, so check the product packaging for the supplied charging accessories.

Frequently Asked Questions

How many puffs does the SKE Crystal CL6000 provide?

The SKE Crystal CL6000 is advertised to provide up to 6,000 puffs. Actual usage will depend on draw length and vaping frequency.

How much e-liquid does the CL6000 contain?

The CL6000 uses a 2ml pod plus a 10ml prefilled refill container, giving a combined capacity of 12ml.

What nicotine strength is the SKE Crystal CL6000?

The CL6000 is supplied with 20mg nicotine salt e-liquid.

Is the SKE Crystal CL6000 rechargeable?

Yes. It features an integrated 800mAh rechargeable battery and uses USB Type-C charging.

Does the CL6000 have a mesh coil?

Yes. The prefilled pod uses an integrated dual-mesh coil for flavour and vapour production.

Is the SKE Crystal CL6000 MTL?

Yes. The CL6000 is designed for a fixed MTL draw and activates automatically when you inhale.

Does the CL6000 have a screen?

Yes. The device features a battery-level display that allows you to monitor the remaining charge.

Can I refill the CL6000 pod with my own e-liquid?

The CL6000 is designed as a prefilled pod system. Rather than manually filling the pod, you replace the depleted prefilled pod and refill combination with a compatible CL6000 replacement.

Do I need to replace the coil separately?

No. The dual-mesh coil is integrated into the prefilled pod. When the pod reaches the end of its usable life, replace the complete pod.

Is the SKE Crystal CL6000 a disposable vape?

No. The CL6000 is a rechargeable reusable pod kit. The main device can be recharged and used with compatible replacement prefilled pods.

Why Choose the SKE Crystal CL6000 Prefilled Pod Kit?

The SKE Crystal CL6000 combines an 800mAh rechargeable battery, prefilled 2ml + 10ml pod system, dual-mesh coil and 20mg nicotine salt e-liquid in a compact MTL pod kit. Its inhale activation and battery display keep operation simple, while the replaceable prefilled pod format means the main device can be reused once the original e-liquid has been depleted.