OXVA Oneo Replacement Pods
Keep your OXVA ONEO Pod Kit performing consistently with OXVA Oneo Replacement Pods. These refillable replacement cartridges feature built in mesh coils and are available in three resistance options, allowing you to choose the setup that matches your preferred vaping style.
Each UK TPD compliant pod holds 2ml of e liquid and uses OXVA’s integrated UNICOIL technology. The pods are available in 0.4Ω, 0.6Ω and 0.8Ω versions, covering Direct To Lung, Restricted Direct To Lung and Mouth To Lung vaping styles. Each pack contains 3 replacement pods.
OXVA ONEO Replacement Pods With Built In Mesh Coils
The OXVA ONEO cartridges feature an integrated mesh coil, so there is no separate coil to purchase or install. The UNICOIL construction combines the coil and pod into one replacement cartridge, making pod changes straightforward when the coil reaches the end of its usable life.
The mesh heating element is designed to provide consistent vapour and flavour while the integrated coil construction keeps the replacement process simple.
Choose From Three OXVA ONEO Pod Resistances
OXVA Oneo Replacement Pods are available in three resistance options. Each version is designed around a different power range and vaping style.
0.4Ω OXVA ONEO Pod For DTL Vaping
The 0.4Ω pod operates between 28W and 34W and is designed for Direct To Lung vaping. It produces a warmer vape with increased vapour production and is recommended for higher VG e liquids, including 70% VG blends.
0.6Ω OXVA ONEO Pod For RDTL Vaping
The 0.6Ω pod is designed for 20W to 26W and provides a Restricted Direct To Lung vaping experience. It offers a middle ground between the higher vapour output of the 0.4Ω version and the tighter draw of the 0.8Ω cartridge. Nicotine salts and 50/50 e liquids are suitable choices for this resistance.
0.8Ω OXVA ONEO Pod For MTL Vaping
The 0.8Ω pod operates at 14W to 18W and is intended for Mouth To Lung vaping. It produces a more restricted draw with lower vapour output and works well with 50/50 e liquids and nicotine salts.
2ml Refillable OXVA ONEO Cartridges
Each OXVA ONEO replacement pod has a 2ml e liquid capacity, complying with the UK TPD capacity limit. The refillable design allows you to use your preferred compatible e liquid rather than replacing the pod every time the e liquid runs out.
The pod includes a visible e liquid window, making it easier to check the remaining e liquid level before it becomes too low.
Side Fill Design For Easy Refilling
The OXVA ONEO cartridge uses a convenient side filling system with a silicone plug. This allows the pod to be topped up without needing a separate replacement tank.
When filling a new pod, allow the e liquid time to saturate the internal wicking material before vaping. Vapestore recommends leaving a newly filled pod for around 10 minutes before use to help prevent dry hits and support proper coil saturation.
Leak Resistant OXVA ONEO Pod Design
The ONEO replacement cartridges use OXVA’s UNICOIL pod construction, which is designed to help minimise e liquid leakage. The cartridge also uses a magnetic connection to secure the pod inside the compatible device.
The transparent pod body also allows you to monitor the e liquid level, helping you know when it is time to refill.
MTL, RDTL And DTL Vaping Options
One of the key advantages of the OXVA ONEO replacement pod range is the choice of three resistances.
The 0.8Ω option is suited to MTL vaping, providing a tighter draw and lower vapour production. The 0.6Ω option sits between MTL and DTL for a more open RDTL experience, while the 0.4Ω cartridge is designed for DTL vaping with greater vapour production.
This gives ONEO users the flexibility to select a replacement cartridge based on their preferred draw and e liquid type.
Which E Liquid Should You Use With OXVA ONEO Pods?
The ideal e liquid depends on the resistance you select.
| Pod Resistance | Power Range | Vaping Style | Recommended E Liquid |
|---|---|---|---|
| 0.4Ω | 28W to 34W | DTL | High VG, 70% VG or higher |
| 0.6Ω | 20W to 26W | RDTL | Nicotine Salt or 50/50 |
| 0.8Ω | 14W to 18W | MTL | Nicotine Salt or 50/50 |
These recommendations are based on current UK retailer guidance for the three ONEO cartridge options.
How Long Do OXVA ONEO Replacement Pods Last?
Pod lifespan depends on factors such as e liquid type, vaping frequency, power setting and draw length. A pod should be replaced when the flavour becomes noticeably weaker, vapour production drops or a persistent burnt taste develops.
Because the OXVA ONEO pods have integrated coils, you replace the complete cartridge rather than changing a separate coil.
How To Refill OXVA ONEO Replacement Pods?
Refilling an OXVA ONEO cartridge is straightforward:
- Remove the pod from the device if required.
- Locate the side filling port.
- Open the silicone filling plug.
- Add your compatible e liquid without overfilling.
- Close the filling port securely.
- Allow the pod to sit for around 10 minutes when using a new cartridge.
- Reinsert the pod and vape within the recommended power range.
Allowing a new pod to saturate before use helps reduce the chance of dry hits and premature coil wear.
When Should You Replace An OXVA ONEO Pod?
Replace the cartridge when you notice signs such as:
- Burnt or unpleasant flavour
- Reduced vapour production
- Noticeably weaker flavour
- Persistent dry hits
- A coil that has reached the end of its usable life
Since the coil is built into the cartridge, a fresh OXVA ONEO replacement pod restores the device with a new integrated coil.
OXVA ONEO Replacement Pod Compatibility
These cartridges are designed specifically for the OXVA ONEO Pod Kit. The OXVA official store describes the ONEO cartridge as being designed exclusively for the ONEO Pod Kit, while UK retailers also specify ONEO compatibility.
These pods should not be assumed to work with other OXVA pod systems such as XLIM or NeXLIM because those devices use different cartridge ranges.
What’s Included In The OXVA ONEO Pod Pack?
Each pack contains:
- 3 x OXVA ONEO Replacement Pods
- Your selected resistance: 0.4Ω, 0.6Ω or 0.8Ω
- 2ml capacity per pod
- Integrated mesh/UNICOIL coil technology
The OXVA ONEO vape device and e liquid are not included.
OXVA ONEO Replacement Pods Specifications
| Feature | Details |
|---|---|
| Brand | OXVA |
| Product | ONEO Replacement Pods |
| Pod Type | Refillable Replacement Cartridges |
| Capacity | 2ml Per Pod |
| Pack Size | 3 Pods |
| Resistance Options | 0.4Ω, 0.6Ω, 0.8Ω |
| Coil Type | Built In Mesh / UNICOIL |
| Filling System | Side Fill |
| Vaping Styles | MTL, RDTL & DTL |
| Compatibility | OXVA ONEO Pod Kit |
| Pod Construction | PCTG |
| E Liquid Compatibility | Nic Salt, 50/50 & High VG Depending On Resistance |
| Device Included | No |
The listed capacity, resistance options, pack size and vaping styles are supported by current OXVA and UK retailer listings.
Frequently Asked Questions About OXVA ONEO Pods
Are OXVA ONEO Replacement Pods Refillable?
Yes. OXVA ONEO replacement pods are refillable cartridges with a 2ml e liquid capacity. They feature a side filling system that allows you to top up the pod with compatible e liquid.
How Many OXVA ONEO Pods Come In A Pack?
Each pack contains 3 replacement pods. You select your preferred resistance when purchasing, with 0.4Ω, 0.6Ω and 0.8Ω options available.
What Resistance Options Are Available For OXVA ONEO Pods?
There are three resistance options: 0.4Ω, 0.6Ω and 0.8Ω. The 0.4Ω version is designed for DTL, 0.6Ω for RDTL and 0.8Ω for MTL vaping.
Which OXVA ONEO Pod Is Best For MTL Vaping?
The 0.8Ω OXVA ONEO pod is designed for Mouth To Lung vaping and operates at 14W to 18W. It is suitable for nicotine salts and 50/50 e liquids.
Which OXVA ONEO Pod Is Best For DTL Vaping?
The 0.4Ω cartridge is the DTL option and operates at 28W to 34W. It is designed for higher vapour production and is recommended with high VG e liquids.
Can I Use Nicotine Salt E Liquid In OXVA ONEO Pods?
Yes, nicotine salt e liquid is suitable for the 0.6Ω and 0.8Ω ONEO cartridges according to current UK retailer guidance. The 0.4Ω cartridge is better suited to high VG e liquid for DTL vaping.
How Much E Liquid Does An OXVA ONEO Pod Hold?
Each UK version OXVA ONEO replacement pod has a 2ml e liquid capacity.
Does The OXVA ONEO Pod Have A Built In Coil?
Yes. The ONEO cartridge uses an integrated mesh coil with OXVA’s UNICOIL technology. Once the coil reaches the end of its usable life, the complete pod is replaced.
Are OXVA ONEO Replacement Pods Compatible With XLIM Devices?
No. These cartridges are designed for the OXVA ONEO Pod Kit. OXVA has separate replacement cartridge ranges for its XLIM devices, so check the exact device and pod model before purchasing.
Reviews
There are no reviews yet.