SMOK Vape Pen Coils 5 Pack

Keep your compatible vape device performing at its best with SMOK Vape Pen Coils 5 Pack. These replacement coils are designed for the SMOK Vape Pen range and provide a straightforward way to replace a worn coil without replacing the entire tank or vape kit.

Available in 0.15Ω Mesh and 0.3Ω configurations, the SMOK Vape Pen coils are designed for sub ohm vaping, with each resistance offering a different balance of flavour and vapour production. The 0.15Ω Mesh option uses mesh coil construction for rapid and even heating, while the 0.3Ω version uses a traditional coil design for flavour focused direct to lung vaping.

Each pack contains 5 replacement coils, making it convenient to keep spare coils available when your current coil reaches the end of its usable life.

SMOK Vape Pen Replacement Coils

SMOK Vape Pen replacement coils are designed specifically around the Vape Pen coil system. Their elongated construction and wicking ports allow e liquid to reach the heating element during use, while the sub ohm resistance is intended for a direct to lung vaping style.

The coils are available in different configurations, allowing you to choose the option that matches your preferred vaping experience and compatible SMOK device.

0.15Ω Mesh Vape Pen Coil

The 0.15Ω Mesh option uses a mesh heating element with a larger heating surface than a conventional wound wire coil. Mesh construction is designed to heat e liquid more evenly and quickly, making this option suitable for users looking for strong flavour and increased vapour production.

The 0.15Ω Mesh coil is designed for higher power vaping and is generally used with high VG e liquids suitable for sub ohm devices.

0.3Ω SMOK Vape Pen Coil

The 0.3Ω Vape Pen coil uses a standard coil configuration and is designed to provide a flavour focused direct to lung vape. Retailer specifications list the 0.3Ω option with a recommended wattage range around 20W to 50W, depending on the specific version and device.

This coil is also a sub ohm option and is intended for use with suitable high VG e liquids.

SMOK Vape Pen Coil Specifications

Feature	Details
Brand	SMOK
Product Type	Replacement Vape Coils
Pack Size	5 Coils
Coil Options	0.15Ω Mesh / 0.3Ω
0.15Ω Coil Type	Mesh
0.3Ω Coil Type	Standard Coil
Vape Style	Direct To Lung
Coil Category	Sub Ohm
Recommended E Liquid	High VG
0.15Ω Wattage	Around 30W to 50W
0.3Ω Wattage	Around 20W to 50W
Compatibility	SMOK Vape Pen 22 And Compatible Vape Pen Models
Replacement Type	Screw In Replacement Coil

Specifications can differ by individual coil configuration, so the resistance and recommended wattage printed on the specific coil packaging should always be checked before use.

Which SMOK Vape Pen Coil Should You Choose?

The right coil depends on the resistance option supported by your device and the type of vape you prefer.

The 0.15Ω Mesh coil is designed around mesh heating and is suited to users looking for rapid heating, strong flavour and higher vapour production. The mesh construction provides a larger heating surface compared with a conventional coil.

The 0.3Ω coil provides a conventional coil configuration with a flavour focused direct to lung experience. It is a suitable replacement option when your device is compatible with the 0.3Ω Vape Pen coil.

Always select a resistance that is specifically compatible with your SMOK device.

SMOK Vape Pen 22 Coil Compatibility

These replacement coils are primarily designed for the SMOK Vape Pen 22 and compatible Vape Pen systems. Retailer listings also identify compatibility with models such as the SMOK Vape Pen V2, Vape Pen Plus and, for some coil configurations, the Vape Pen 22 Light.

Because SMOK produces multiple coil families with similar names, these coils should not be treated as universal SMOK replacement coils. Check your exact device and coil resistance before ordering.

High VG E Liquid For SMOK Vape Pen Coils

SMOK Vape Pen 22 coils are sub ohm coils and are generally recommended for use with high VG e liquids, with several UK retailers recommending liquids containing 60% VG or higher.

High VG e liquid is commonly paired with sub ohm coils because the thicker liquid is designed for devices that produce larger amounts of vapour.

For the best results, use an e liquid that is appropriate for the resistance and power range of your selected coil.

How To Replace A SMOK Vape Pen Coil?

Replacing a SMOK Vape Pen coil is straightforward when following the instructions for your particular device.

Step 1: Empty The Tank

If possible, empty or drain the remaining e liquid from the tank before removing the old coil. This helps prevent spills during coil replacement.

Step 2: Remove The Old Coil

Unscrew the tank base and carefully remove the used coil from the tank.

Step 3: Prime The New Coil

Before installing the new coil, apply a small amount of suitable e liquid to the visible cotton areas. Fill the tank and allow the coil to soak for several minutes before vaping.

Priming allows the wicking material to become saturated and helps reduce the chance of a dry hit when the new coil is first used.

Step 4: Install The New Coil

Screw the replacement coil securely into the tank base. Do not overtighten it.

Step 5: Fill The Tank

Fill the tank with your compatible e liquid while avoiding the central airflow tube.

Step 6: Allow The Coil To Saturate

After filling, give the new coil several minutes to absorb the e liquid fully. Start at a lower power setting within the recommended range and gradually adjust as required.

How Long Do SMOK Vape Pen Coils Last?

Coil lifespan depends on factors such as vaping frequency, e liquid composition, power level and how the coil is primed.

A coil may need replacing when you notice:

• Reduced flavour
• Reduced vapour production
• A burnt or unpleasant taste
• Gurgling or unusual performance
• Darkened or heavily saturated cotton
• Noticeably weaker performance

Using suitable e liquid and keeping the coil properly saturated can help maintain consistent performance.

Why Does My New Vape Pen Coil Taste Burnt?

A new coil can produce a burnt taste if it has not been properly saturated before use. If the cotton inside the coil is still dry when the coil is fired, it can become scorched.

To reduce this risk, prime the coil with e liquid, fill the tank and allow enough time for the e liquid to soak into the wicking material before vaping.

Starting at the lower end of the recommended wattage range can also help when using a fresh coil.

SMOK Vape Pen Coil Pack Size

Each product pack contains 5 replacement coils. Having multiple replacement coils means you can replace the coil as required without purchasing a new kit or tank.

The exact coil resistance should be selected according to your compatible SMOK device and preferred setup.

What Is Included?

Each pack contains:

• 5 x SMOK Vape Pen Replacement Coils
• Selected resistance option: 0.15Ω Mesh or 0.3Ω
• Replacement coil heads for compatible SMOK Vape Pen devices

Vape device, tank and e liquid are not included.

Important Information About Sub Ohm Coils

Both the 0.15Ω and 0.3Ω options are below 1.0Ω and therefore fall into the sub ohm category.

Sub ohm coils generally operate at higher power and produce more vapour than higher resistance MTL coils. Retailer guidance recommends using suitable high VG e liquids with these coils.

These coils are intended for users familiar with sub ohm vaping. Always use the coil within the manufacturer’s recommended resistance and wattage parameters.

Frequently Asked Questions

What Are SMOK Vape Pen Coils?

SMOK Vape Pen coils are replacement coil heads designed for compatible SMOK Vape Pen devices. They are available in different resistance and coil configurations, including 0.15Ω Mesh and 0.3Ω options.

How Many SMOK Vape Pen Coils Are In A Pack?

Each pack contains 5 replacement coils. You select the required resistance when ordering.

Are SMOK Vape Pen 22 Coils Sub Ohm?

Yes. The 0.15Ω and 0.3Ω options are both below 1.0Ω, making them sub ohm coils. They are designed for direct to lung vaping and are generally paired with high VG e liquids.

What Is The Difference Between 0.15Ω Mesh And 0.3Ω SMOK Vape Pen Coils?

The 0.15Ω option uses a mesh heating element, which provides a larger heating surface and is designed for rapid heating, flavour and vapour production. The 0.3Ω version uses a conventional coil configuration and is designed for flavour focused direct to lung vaping.

Which E Liquid Should I Use With SMOK Vape Pen Coils?

SMOK Vape Pen 22 sub ohm coils are generally recommended with high VG e liquids, with UK retailer guidance commonly recommending around 60% VG or higher.

How Do I Prime A New SMOK Vape Pen Coil?

Apply a small amount of suitable e liquid to the exposed cotton areas of the new coil, install it into the tank, fill the tank and allow several minutes for the e liquid to fully saturate the wick before vaping.

How Do I Know When To Change My SMOK Vape Pen Coil?

Replace the coil when flavour or vapour production drops noticeably, or if the vape develops a persistent burnt taste. Frequent vaping, high power settings and certain e liquids can affect coil lifespan.

Are SMOK Vape Pen Coils Compatible With All SMOK Devices?

No. SMOK produces many different coil families, and Vape Pen coils are designed for specific compatible devices. The Vape Pen 22 coil range is associated with devices including the SMOK Vape Pen 22 and certain Vape Pen models. Always check your exact device before purchasing.

Can I Use 0.15Ω Mesh Coils In A SMOK Vape Pen 22?

The 0.15Ω Mesh is listed as one of the Vape Pen 22 compatible coil options by UK retailers. However, compatibility can depend on the specific device version, so check your device specifications before installing a different resistance.

What Wattage Should I Use With SMOK Vape Pen Coils?

The recommended range depends on the selected coil. Retailer specifications list approximately 20W to 50W for the 0.3Ω version and around 30W to 50W for the 0.15Ω Mesh version. Always follow the wattage range printed on the coil or packaging for your exact version.