Vaporesso Armour Max Vape Kit

The Vaporesso Armour Max Vape Kit is a powerful dual-battery sub-ohm vape kit designed for experienced vapers who want high wattage, adjustable performance and a durable everyday setup. Delivering up to 220W of adjustable power, the Armour Max is powered by two external 21700 or 18650 batteries and features Vaporesso’s AXON chipset for responsive performance and multiple vaping modes. The kit is paired with the Vaporesso iTank 2 and GTi mesh coils, making it well suited to direct-to-lung (DTL) vaping.

Built around Vaporesso’s ARMOUR design, the Armour Max features a protective TPU construction designed to provide resistance against everyday drops and scratches. Its rugged design is combined with a 0.96-inch TFT screen, simple button controls and a Uni-Lock system, giving you convenient access to your vaping settings while helping prevent accidental firing.

Key Features of the Vaporesso Armour Max

• Up to 220W adjustable power output
• Supports 2 x 21700 or 2 x 18650 batteries
• 18650 battery sleeves included
• AXON chipset
• 0.96-inch TFT display
• Rugged TPU protective construction
• Drop- and scratch-resistant design
• Uni-Lock fire button
• Vaporesso iTank 2
• 2ml TPD tank capacity
• GTi 0.2Ω and 0.4Ω mesh coils
• Adjustable airflow
• Top-fill tank design
• USB Type-C charging at 5V/2A
• 510 connection
• Designed for DTL/sub-ohm vaping

The Armour Max is designed around performance and control, while its protective construction adds durability for regular use.

Powerful 220W Dual-Battery Performance

At the heart of the Armour Max is a high-output mod capable of delivering between 5W and 220W. The device uses two external 21700 batteries, with compatibility for 18650 batteries when the supplied sleeves are used. Batteries are sold separately.

The dual-battery configuration provides the power required for the Armour Max’s high-wattage DTL setup. The adjustable wattage range also gives you flexibility to set the device according to the GTi coil installed and your preferred vaping style.

The Armour Max is therefore particularly suited to users looking for a high-power sub-ohm vape kit rather than a compact pod system.

AXON Chipset and Adjustable Vaping Modes

The AXON chipset provides the Armour Max with responsive firing and a selection of adjustable vaping functions. Depending on the selected mode and device configuration, users can customise the power delivery to suit their preferred setup.

The large 0.96-inch TFT screen provides a clear view of important vaping information and settings. The control buttons make it easy to navigate the device and adjust your output.

The Armour Max also features Vaporesso’s Uni-Lock system, allowing the fire button to be secured when the device is being carried or stored.

Rugged TPU Armour Protection

Durability is one of the defining features of the Vaporesso Armour Max. The device uses a protective TPU construction designed to help shield the mod from everyday knocks, drops and scratches. Vaporesso describes the ARMOUR design as providing full-body protection around the device and tank area.

This makes the Armour Max suitable for users who want a robust dual-battery vape kit without sacrificing high-power performance.

The rugged exterior is combined with an ergonomic form, allowing the device to be comfortably held while accessing the screen and controls.

Vaporesso iTank 2 – 2ml TPD Tank

The Armour Max kit is supplied with the Vaporesso iTank 2, with UK listings specifying a 2ml TPD capacity. The tank uses a convenient top-fill system and adjustable airflow, making refilling and airflow adjustment straightforward.

To refill the iTank 2, remove or open the top-fill section according to the tank design and add your preferred compatible e-liquid through the fill port. Avoid overfilling and make sure the top section is securely closed before vaping.

The iTank 2 uses Vaporesso’s GTi coil platform, allowing you to replace the coil when required rather than replacing the entire tank.

GTi Mesh Coils for DTL Vaping

The Vaporesso Armour Max kit includes two GTi mesh coils, giving you different power options for your vaping setup.

The included coils are:

• GTi 0.2Ω Mesh Coil – recommended range of approximately 60–75W
• GTi 0.4Ω Mesh Coil – recommended range of approximately 50–60W

These coils are designed for direct-to-lung (DTL) vaping and are intended to be used with suitable e-liquid and wattage settings.

Always check the wattage range printed on the specific coil before use and start at the lower end of the recommended range before adjusting gradually.

Adjustable Airflow for a Customised Draw

The iTank 2 features adjustable airflow, allowing you to control the amount of air entering the tank during each inhale.

Opening the airflow can provide a more open DTL draw, while reducing the airflow can create a tighter inhale. Adjusting the airflow alongside your wattage and coil choice allows you to customise the overall feel of the vape.

Easy Top Filling

Refilling the iTank 2 is designed to be straightforward. The top-fill mechanism gives you access to the e-liquid fill port without needing to remove the entire tank from the mod.

When refilling:

1. Turn the device off if required.
2. Open the iTank 2 top-fill section.
3. Add compatible e-liquid through the fill port.
4. Avoid filling beyond the recommended level.
5. Close the top section securely.
6. Check for any excess e-liquid before vaping.

If you are installing a new GTi coil, prime the coil with e-liquid and allow sufficient time for the cotton to saturate before firing.

How to Set Up the Vaporesso Armour Max Vape Kit

Setting up the Armour Max is simple once the batteries, coil and tank are prepared.

Step 1 – Install the Batteries
Insert two compatible 21700 batteries, or two 18650 batteries using the supplied sleeves. Always check the battery orientation markings inside the device. Batteries are not included with the kit.

Step 2 – Install the GTi Coil
Fit the GTi 0.2Ω or 0.4Ω mesh coil securely into the iTank 2.

Step 3 – Prime the Coil
Apply a small amount of compatible e-liquid to the exposed coil cotton and fill the tank. Allow the new coil to saturate before vaping.

Step 4 – Set the Wattage
Start within the lower part of the recommended wattage range printed on your GTi coil. Gradually adjust the power according to your preferred setup.

Step 5 – Adjust the Airflow
Use the adjustable airflow to find your preferred DTL draw.

Step 6 – Vape
Once the coil is fully saturated and the device is configured correctly, use the fire button to activate the device.

Vaporesso Armour Max Specifications

The core specifications above are supported by Vaporesso’s current product information and UK retailer listings.

What’s Included?

The Vaporesso Armour Max Vape Kit includes 1 x Armour Max Mod, 1 x Vaporesso iTank 2, 1 x GTi 0.2Ω Mesh Coil pre-installed, 1 x GTi 0.4Ω Mesh Coil, 1 x spare glass tube, 1 x Type-C USB charging cable, 1 x tank protective cover, 2 x O-rings, 2 x 18650 battery sleeves, 1 x refilling silicone plug, 1 x user manual/warranty card and 1 x safety manual/reminder card. Batteries are not included and must be purchased separately.

Who Is the Vaporesso Armour Max For?

The Vaporesso Armour Max is designed primarily for experienced vapers looking for a high-powered DTL/sub-ohm setup. Its 220W output, external dual-battery configuration, GTi mesh coils and iTank 2 make it considerably more powerful and configurable than compact pod systems.

Its rugged TPU construction also makes it a practical choice for users who want additional protection around their mod and tank during everyday use.

Because it uses external batteries and high-power sub-ohm coils, users should be familiar with safe battery handling and appropriate coil/wattage settings before using the device.

Frequently Asked Questions

What batteries does the Vaporesso Armour Max use?

The Armour Max supports two 21700 batteries or two 18650 batteries. The supplied 18650 sleeves allow compatible 18650 cells to be used. Batteries are sold separately.

What is the maximum wattage of the Armour Max?

The Vaporesso Armour Max has an adjustable output range of 5W to 220W.

Is the Vaporesso Armour Max suitable for DTL vaping?

Yes. The Armour Max is a sub-ohm DTL vape kit and is supplied with GTi mesh coils designed for DTL vaping.

Which coils are included with the Armour Max?

The kit includes a GTi 0.2Ω mesh coil and a GTi 0.4Ω mesh coil. The 0.2Ω coil is rated around 60–75W, while the 0.4Ω coil is rated around 50–60W.

What tank comes with the Armour Max?

The version covered in this product description comes with the Vaporesso iTank 2, with UK TPD listings specifying a 2ml capacity.

Does the Armour Max have USB-C charging?

Yes. The Armour Max uses USB Type-C charging with a specified charging input of 5V/2A.

Does the Vaporesso Armour Max include batteries?

No. The two required 21700 or 18650 batteries are sold separately. The kit includes 18650 battery sleeves for compatible 18650 cells.

Can I replace the coil in the iTank 2?

Yes. The iTank 2 uses replaceable Vaporesso GTi coils, allowing you to replace the coil when it reaches the end of its usable life.

What e-liquid should I use with the Armour Max?

The Armour Max is designed for sub-ohm DTL vaping. Compatible high-VG e-liquids, commonly around 70VG/30PG, are generally used with GTi mesh coils. Always check the specific coil and e-liquid manufacturer’s recommendations before use.

Is the Vaporesso Armour Max a pod kit?

No. The Armour Max is a dual-battery sub-ohm vape kit with a 510-connected iTank 2, rather than a pod-based vape kit.

Is the Armour Max suitable for beginners?

The Armour Max has straightforward controls, but its 220W output, external batteries and sub-ohm DTL configuration make it more appropriate for experienced adult vapers familiar with high-power vape devices and external battery safety.

Safety & Usage Information

The Vaporesso Armour Max is intended for adult use only. Nicotine-containing e-liquids should be handled responsibly and kept away from children and pets. Use only compatible batteries in good condition, follow the manufacturer’s battery orientation and charging instructions, and never use damaged or leaking batteries.

Always use the recommended wattage range for your GTi coil and replace coils when they become worn or damaged. The Armour Max is a high-powered sub-ohm device and should be used according to the manufacturer’s instructions.